Hello,Welcome to the official website of Changzhou Yibao Drying Technology Co., Ltd.

Mobile
English
中文版
Contact

Add:ZhengLuTown,ChangzhouCity,Jiangsu Province

Contact:Mr. Liu

Mobile:13915027369

Tel:0519-88991938

Web:www.czyibao.cn/en/

Drying equipment series
Current location:Home > Products > Drying equipment series

ZPG vacuum rake dryer

Working principle  This machine is a novel horizontal intermittent type vacuum drying equipment . The wet material is conductively evaporated. The scraper stirrer continuously removes the material on the hot surface and forms a circulating flo…
More

Detailed description

Working principle
  This machine is a novel horizontal intermittent type vacuum drying equipment . The wet material is conductively evaporated. The scraper stirrer continuously removes the material on the hot surface and forms a circulating flow in the container. After the water evaporates, Vacuum pump out.


   Performance characteristics
 
◎ This machine uses a large area of sandwich heating, heat transfer surface, high thermal efficiency. 
 ◎ The machine is set to stir, so that the material in the cylinder to form a continuous cycle of state, to further improve the uniformity of the material heated. 
 ◎ The machine is set to stir, so that the slurry, paste, paste material can be dried smoothly.


   Adaptable materials
 
◎ Pharmaceuticals, food, chemical and other industries conduct the following materials drying: 
 ◎ suitable for paste, paste, powder materials; 
 ◎ heat-sensitive materials that require low temperature drying; 
 ◎ easily oxidized, explosive, strong stimulation, highly toxic materials ; 
 ◎ material recovery requires an organic solvent.


   Schematic


 

Technical specifications

projectmodel
nameunitZPG-500ZPG-750ZPG-1000ZPG-1500ZPG-2000ZPG-3000
Working volumeL30045060090012001800
Heating aream 267.69.312.314.619.3
Stirring speedRpm6-30 stepless speed regulation
powerKw45.55.57.51115
Sandwich design pressure (hot water)Mpa≤ 0.3
Vacuum inside the cylinderMpa-0.09 to 0.096

Note: The amount of water evaporation is related to the characteristics of the material and the hot air inlet and outlet temperatures. When the outlet temperature is 90 o C, the water evaporation curve is shown in the above figure (for selection reference). As the product is continuously updated, the relevant parameters are changed without prior notice.